Cencorp PCB router bits

Cencorp provides the highest quality PCB Router Bits for your needs.

Specification page has listing what we currently carry or can get in short lead time.

Any size that is not listed, pls ask if you need different size or length.

Most of the bits comes with the preset collar. But we can also provide them w/o collars.

 

 

 

UPCUT SLOW SPIRAL:

With upcut design chips are drawn up to assist vacuum system.

Clean, burr-free cutting with maximum tool life is realized when tools are used on well maintained equipment that

incorporates pressure foot holding system.

20º Helix Angle

0.1250 Shank Diameter

1.500 overall Length

UPCUT FAST SPIRAL:

Upcut Fast Spiral Router bits are available with fishtail, drill point, or non cutting end geometry.

With upcut design chips are drawn down up to assist vacuum system.

Clean, burr-free cutting with maximum tool life is realized when tools are used on well maintained equipment that

incorporates pressure foot holding system.

30º Helix Angle

0.1250 Shank Diameter

1.500 overall Length

DOWNCUT SLOW SPIRAL:

Router Bits are designed to hold the board down while routing.

This router bit tooth configuration will produce a clean, smooth finish.

Downcut Slow Spiral are available fishtail, drill point, or non cutting end geometry.

20º Helix Angle

0.1250 Shank Diameter

1.500 overall Length

DOWNCUT FAST SPIRAL:

Fast Downcut Router Bits are designed to hold the board down while routing.

This router bit tooth configuration will produce a clean, smooth finish.

Downcut Slow Spiral are available fishtail, drill point, or non cutting end geometry.

30º Helix Angle

0.1250 Shank Diameter

1.500 overall Length

UPCUT CHIPBREAKER:

Upcut Chipbreaker creates an upward chip flow to accommodate a vacuum system.

Consistent clean surfaces and extended tool life is achievable when used in conjunction with the

latest routing equipment technology. The chipbreaking action of this router bit insures a fine, burr-free finish.

Ideal for use with polyimide quartz boards.

20º Helix Angle

0.1250 Shank Diameter

1.500 overall Length

DOWNCUT CHIPBREAKER:

Downcut Chipbreaker is designed to hold the board down during routing. This style will also help in preventing possible delamination.

Ideal for use with polyimide quartz boards.

30º Helix Angle

0.1250 Shank Diameter

1.500 overall Length

Cencorp Part Number Size/mm Size/Inch Lentgh/Inch Type Collar
3417-0032-000 1.35 0.0530 1.5000 FIVE FLUTE X
3400-2579-000 0.40 0.0156 1.5000 X
3400-2580-000 2.49 0.098 1.5000 X
3400-2581-000 1.19 0.0469 1.5000 X
3400-2582-000 3.18 0.1250 1.5000 X
3400-2583-000 1.40 0.0551 1.5000 X
3400-2584-000 1.00 0.0394 1.5000 X
3400-2585-000 1.00 0.0394 1.5000 NO
3400-3107-000 0.79 0.0310 1.5000 X
3400-3169-000 2.36 0.0930 1.5000 FISHTAIL X
3400-3170-000 0.79 0.0312 1.5000 X
3400-3171-000 2.16 0.085 1.5000 FISH TAIL X
3400-3684-000 1.17 0.046 1.5000 X
3400-4408-000 1.07 0.042 1.5000 FISHTAIL X
3400-4409-000 1.98 0.078 1.5000 FISHTAIL X
3400-4450-000 1.59 0.0625 1.5000 X
3400-4450-001 1.59 0.0625 1.5000 NO
3417-0005-000 1.57 0.062 1.5000 TWO FLUTE X
3417-0006-000 2.36 0.093 1.5000 TWO FLUTE X
3417-0007-000 0.91 0.036 1.5000 X
3417-0010-000 2.54 0.100 1.5000 X
3417-0011-000 1.59 0.0625 1.5000 SINGLE FLUTE X
3417-0012-000 1.59 0.0625 2.0000 X
3417-0013-000 1.57 0.062 1.5000 FISHTAIL X
3417-0019-000 2.50 0.0984 1.5000 X
3417-0021-000 2.25 0.0886 1.5000 X
3417-0022-000 1.85 0.0728 1.5000 FISHTAIL X
3417-0023-000 2.10 0.0827 1.5000 FISHTAIL X
3417-0033-000 1.45 0.0571 1.5000 FISHTAIL X
3417-0035-000 1.5 0.0590 1.5000 FIVE FLUTE X
3417-0036-000 2.38 0.0938 2.0000 UP-CUT X
3417-0037-000 2.38 0.0938 2.0000 DOWN-CUT X
3417-0038-000 2.55 0.1004 1.5000 UP-CUT X
3417-0045-000 2.38 0.0938 1.5000 UP-CUT X
3417-0046-000 2.54 0.1000 1.5000 UP-CUT X
3417-0047-000 2.38 0.0938 1.5000 DOWN-CUT X
3417-0048-000 2.54 0.1000 1.5000 DOWN-CUT X
3417-0049-000 1.5 0.0591 1.5000 X
3417-0050-000 1.16 0.0457 1.5000 X
3417-0051-000 1.35 0.0531 1.5000 X
3417-0053-000 2.5 0.0984 1.5000 X
3417-0054-000 0.6 0.0236 1.5000 X
3417-0056-000 1.59 0.0625 1.5000 FISHTAIL DOWN-CUT X
3417-0057-000 4.70 0.1850 1.5000 REV CUT, COLLAR X
3417-0058-000 2.6 0.1020 1.5000 FISHTAIL, UP-CUT X
3417-0059-000 2.65 0.1043 1.5000 FISHTAIL, UP-CUT X
3417-0086-000 1.25 0.0492 1.5000 X
3417-0087-000 2 0.0787 1.5000 X
3417-0088-000 0.51 0.0200 1.5000 X
3417-0089-000 0.57 0.0225 1.5000 X
3417-0090-000 2.38 0.0938 1.5000 DOWNCUT X
3417-0091-000 1.02 0.040 1.5000 UP-CUT/CHIP BREAKER X
3417-0092-000 1.02 0.0400 1.5000 UPCUT/FISHTAIL X
3417-0093-000 1.04 0.041 1.5000 UPCUT/FISHTAIL X
3417-0094-000 1.07 0.042 1.5000 UPCUT/FISHTAIL X
3417-0095-000 1.02 0.040 1.5000 DRILL POINT X
3417-0096-000 1.04 0.041 1.5000 UPCUT/ DRILL POINT X
3417-0097-000 1.07 0.042 1.5000 UPCUT/ DRILL POINT X
3417-0098-000 1.02 0.040 1.5000 UPCUT ENDMILL X
3417-0099-000 1.04 0.041 1.5000 UPCUT ENDMILL X
3417-0100-000 1.07 0.0420 1.5000 UP-CUT X
3417-0102-000 0.2 0.0078 1.5000 ENDMILL X
3417-0104-000 0.8 0.0315 1.5000 X

Name (required):

E-mail address (required):

Phone number:

Company:

Message (required):